SCANNING OPERATION
SCANNING FOR ACTIVE FREQUENCIES
1.To search for activity on a frequency, press SC. The trans- ceiver begins to scan up or down the full frequency range, and it stops on each active frequency for the duration set by the scan delay option (see “Using Scan Delay” on Page 32).
2.To change the scanning direction, press or .
3.To stop on a frequency or to stop scanning completely, press SC again.
Using Scan Delay
If the
SCANNING STANDARD MEMORY LOCATIONS
1.Press MR (so appears), then press SC. The transceiver scans all locations except empty locations and the ones you programmed to be passed during scanning.
2.To change the scanning direction, press or .
3.To stop scanning, press SC again.
32