Radio Shack HTX-400 Use with the, Use it to, FUNC + Key to, Mo Rev, Beep, Mr Mw, Sc Rpt

		Use with the
Key/Control	Use it to:	FUNC + Key to:
(T.SET)	Change (decrease)	Accesses the Tone
	the	Set Option menu
	frequency by the value	and settings.
	set for CS (see the first
	menu option on Page
	16).
MO (REV)	Press to override	Reverse the
	squelch. Press and	repeater offset.
	hold to cycle through
	rC, tC, r, and CS set-
	tings.
(BEEP)	Turn on the display’s	Enable/disable the
	backlight for 4 sec-	key tone.
	onds.	appears when the
		key tone is enabled.
MR (MW)	Enter memory setting	In memory mode,
	mode. MR and the last	starts the display
	used memory location	flashing. Then use
	appear.	or	to
		access a frequency
		to store in a mem-
		ory location.
SC (RPT)	Starts and stops scan-	Set the radio to
	ning. Hold down and	simplex or duplex
	power on to access	mode when in VCO
	expanded band cover-	mode. Set the
	age	repeater offset for a
	(420–450 MHz).	memory location
		when in memory
		mode.

20