Setting A Memory Location to Always Skip During Scanning
The HTX-400 is preset to include all memory locations (except empty locations) during memory scanning . Follow these steps to set the transceiver to have it always skip (or resume scan- ning) a specific location during scanning.
1. Press MR. 
and the last used memory location appear.
2.Repeatedly press 
or 
to select the desired memory location.
3.Press FUNC+MR. The selected memory location and 
flash.
4.To set the 
or 
so SCSP ON (scan skip) appears.
To include the displayed location during scanning, press 
or 
so SCSP oF appears.
5.When you finish, press SC again, then press PTT to store the setting.
33
