Radio Shack HTX-400 owner manual Memory Operation, Storing A Transmit/Receive Frequency

MEMORY OPERATION

Your HTX-400 has 30 standard memory locations that you can use to store frequencies for quick access. For each memory loca- tion, you can also store other settings such as the repeater offset, CTCSS tones, and frequencies to pass or lock out during scan- ning.

STORING A TRANSMIT/RECEIVE FREQUENCY

1.Press MR. and the last used memory location appear.

2.Repeatedly press or to select the desired memory location. ------appears if the memory location is empty.

3.Press FUNC+MR. The selected memory location and flash.

4. Select	the desired frequency by repeatedly pressing
or	, or use direct frequency entry to select a frequency.

5.To enter a frequency offset for repeater operation, press FUNC + SC. The HTX-400 displays the current offset for the calling frequency. Then press or to select the desired offset. Press PTT to store your setting.

6.Press FUNC + REV to select the offset direction (+ or –). To remove an offset for simplex operation, set the repeater off- set to 0.00.

7.If desired, set the tone squelch settings (see “Continuous Tone Coded Squelch System Features” on Page 35).

8.Press PTT to store all settings, then press MR to exit the memory mode.

29