Follow these steps to record a memo.
1.Hold down PLAY/SKIP until the TAD beeps.
2.Position yourself about 8 inches away from the TAD and speak into the microphone (located on the front of the TAD).
3.The TAD automatically stops recording after 60 seconds, or you can press ANSWER/STOP/DELETE when you finish. The TAD beeps once.
The memo is recorded along with the in- coming messages. To hear the memo, simply play back your messages.
CHANGING THE REMOTE OPERATION SECURITY CODE
The TAD’s remote operation security code is preset to 764. You can operate your TAD remotely with this code; how- ever, we recommend that you set your own code.
Notes:
•You have 8 seconds to set each individual digit. Otherwise, you must start over from Step 1.
•If AC power fails and the backup battery becomes weak, the remote operation security code automati- cally resets to 764.
1.Use a pointed object, such as a straightened paper clip, to hold down CODE (located on the right side of the TAD) until the TAD beeps and announces the first digit of the current security code.
Illus. showing CODE switch.
2.Repeatedly press PLAY/SKIP or OGM/REPEAT to set the first digit,
then press ANSWER/STOP/ DELETE. The TAD beeps and announces the second digit.
3.Repeatedly press PLAY/SKIP or OGM/REPEAT to set the second digit, then press ANSWER/STOP/ DELETE. The TAD beeps and announces the third digit.
4.Repeatedly press PLAY/SKIP or OGM/REPEAT to set the third digit,
then press ANSWER/STOP/ DELETE. The TAD beeps once and announces the complete remote operation security code.
19
