Radio Shack TAD-764 owner manual Mounting the TAD, On a Desk Top

43-764.fm Page 7 Friday, August 13, 1999 2:43 PM

MOUNTING THE TAD

Select a location that is near both a modular telephone jack and an AC out- let. You can place the TAD on a desk, or mount it on a wall plate or directly on a wall.

Your TAD-764 connects directly to a modular telephone line jack. If the jack is not a modular jack, you must update the wiring. You can convert the wiring yourself, using jacks and adapters available at your local RadioShack store. Or, you can let the telephone company update the wiring for you. The USOC number of the jack to be installed is RJ11C, or RJ11W for a wall plate jack.

Note: Adjust VOLUME (located on the TAD’s right side) to the middle position before connecting power.

On a Desk Top

Follow these steps when you place the TAD on a desk, shelf, or table.

1.Plug one end of the supplied long modular cord into the TO LINE jack on the back of the base.

Illus of TO LINE jack and end of modular cord about to be inserted into jack.

Other connections are not yet made.

2.Plug the modular cord’s other end into a modular phone line jack.

3.Plug one end of the supplied coiled handset cord into the jack on the base’s bottom and route the cord into the groove near it. Plug the other end into the handset’s jack.

Illus. of VOLUME switch.

Caution: The supplied adapter sup- plies 9 volts AC, delivers at least 440 milliamps, and has a plug which proper- ly fits the TAD’s AC 9V 440mA jack. Us- ing an adapter that does not meet these specifications might damage the TAD or the adapter.

Illus. of coiled handset cord and base

4.Place the handset in the cradle.

5.Insert the supplied AC adapter’s barrel plug into the AC 9V 440mA jack on the back of the base.

Illus. of AC 9V 440mA jack. Show barrel plug about to be inserted into jack. Show modular cord already con-

7