Radio Shack TAD-764 Illus. of Answer PLAY/SKIP indicators, Illus. showing routing of modular cord

43-764.fm Page 8 Friday, August 13, 1999 2:43 PM

6.Route the adapter’s cord through the strain relief slot on the base.

Illus. showing cord rout- ed through the strain re- lief slot.

7.Plug the adapter into a standard AC outlet.

When you first connect power, the PLAY/SKIP indicator flashes (until you record the outgoing message), the ANSWER indicator flashes (if you did not install a backup bat- tery), and the TAD automatically runs a self-test for about 20 sec- onds. You cannot operate the TAD during this test. When the test is complete, the TAD Beeps once and announces, “Answer off.”

Illus. of ANSWER and

PLAY/SKIP indicators.

8

On a Wall Plate

1.Plug one end of the supplied short modular cord into the TO LINE jack on the back of the base.

Illus of TO LINE jack and end of modular cord about to be inserted into jack.

Other connections are not yet made.

2.Route the cord into the groove on the phone’s base.

Illus. showing routing of modular cord.

3.Plug one end of the supplied coiled cord into the jack on the bottom of the base and route the cord into the groove beside the jack.

Illus. showing routing of coiled cord before it is plugged into the handset.