TURNING THE BASE’S RINGER ON AND OFF
To turn off the base’s ringer, set RINGER on the back of the base to OFF. You can still make or receive calls using this phone, and telephones on the same line and the TAD’s handset still ring when there is an incoming call.
To turn on the base’s ringer, set RINGER to ON.
SETTING THE HANDSET’S RINGER VOLUME
At any time except during a call, press t or s to set the handset’s ringer volume. The phone rings at the selected volume and the display shows Ringer Low or
Ringer High.
14
SETTING THE NUMBER OF RINGS
Set RING TIME on the side of the base to 3, 5, or T/S to select how long the TAD waits to answer a call (3 rings, 5 rings, or
Note: If you plan to check messages by long distance, set RING TIME to
SETTING THE DAY/TIME
You must set the day of the week and time so the TAD can record the correct day and time of each message.
Note: If you wait more than 15 seconds between each key press, the TAD exits the time setting process. Start again at Step 1.
1.Hold down CLOCK until the TAD beeps. The TAD announces the cur- rently set day and displays the day’s number (0 for Sunday, 1 for Mon- day, and so on).
