To page the handset from the base, press INTERCOM. Both the handset and base ring, and Paging appears on the handset’s display. Press TALK or INTCM on the handset to answer the page. The handset display changes to Intercom.
To end the intercom call, press TALK on the handset, or SPEAKER on the base, or hang up the handset.
If a call comes in during an intercom conversation, either the person at the base or the person at the handset can answer the call. Press TALK on the handset or SPEAKER on the base once to end the intercom call, then press TALK or SPEAKER again to answer the incoming call.
Note: The intercom does not operate if the party being paged is already on a call.
Transferring a Call Between the Handset and Base
You can use the
To transfer a call from the handset to the base, press INTCM. The call is put on hold, and Hold and Paging Base ap-
20
pear. When the person at the base an- swers, press TALK. The call is released from hold and transferred to the base. To bring the handset back into the con- versation, press TALK again.
To transfer a call from the base to the handset, press INTERCOM. The call is put on hold, and Hold and Paging ap- pear on the handset’s display. When the person with the handset answers, press SPEAKER. The call is released from hold and transferred to the handset. To bring the base back into the conversation, press SPEAKER again.
MEMORY DIALING
You can store up to 10 numbers and names in memory, then dial a stored number by pressing a memory location number. Each number can be up to 20 digits, and each name can be up to 14 characters.
Use the supplied memory directory stickers to record your stored numbers. (Use a pencil in case you need to change the number later.) Peel the backing from each sticker and attach them to the phone as shown.
