43-797.fm Page 35 Monday, August 16, 1999 9:20 AM
Problem | Suggestion | |
|
| |
|
| |
The handset stops working or | Move the handset closer to the base. | |
works poorly during a call. |
| |
Lift the base’s antenna to a vertical position. | ||
| ||
|
| |
| Be sure the battery pack is charged. (If the bat- | |
| tery power is too low, it does not have enough | |
| power to light the display.) | |
|
| |
| If the base loses power while the handset is | |
| away, the security | |
| might change. Restore power to the base, then | |
| place the handset back on the base. The | |
| CHARGE indicator lights, indicating that the | |
| code is set again. | |
|
| |
| Check the charging contacts on the handset | |
| and base. If they are dirty, clean them with a | |
| pencil eraser. | |
|
| |
The call is too noisy. | Hang up and redial the number. | |
|
| |
The TAD does not answer | Make sure the TAD is turned on. | |
calls. |
| |
Make sure the AC adapter and battery pack are | ||
| ||
| properly connected. | |
|
| |
| Check all phone line connections. | |
|
| |
The TAD does not record call- | REC TIME is set to ANN (announcement only). | |
ers’ messages. | Set it to 1 or 4. | |
|
| |
| Delete messages if memory is full. | |
|
| |
The handset’s display flashes | Be sure the battery pack is correctly connected. | |
slowly when it is on the base |
| |
and/or the CHARGE indicator |
| |
flashes every few seconds. |
| |
|
| |
Error appears on the display | Occasional errors are normal. If the phone fre- | |
instead of a Caller ID record. | quently displays Error, contact your local | |
| telephone company or RadioShack store for | |
| assistance | |
|
|
If you still have problems, disconnect the phone. If other phones on the same line work properly, the fault is in this phone or its installation. If you cannot find the prob- lem, take your phone to your local RadioShack store for assistance.
35
