Radio Shack TAD -797 owner manual Using Redial, Using PAGE/INTERCOM

43-797.fm Page 19 Monday, August 16, 1999 9:20 AM

USING REDIAL

To quickly dial the last number dialed, press TALK, then press REDIAL.

Notes:

•You can also press REDIAL on the handset first, then press TALK.

•The redial memory holds up to 32 digits, so you can redial long- distance as well as local numbers.

•The redial memory also holds pause entries. See “Entering a Pause” on Page 22.

•When you press FLASH and press any number key, the redial memory stores the number entered after FLASH, deleting any previous entry (see “Using FLASH” on Page 18).

USING TONE SERVICES ON A PULSE LINE

Some special services, such as bank- by-phone, require tone signals. If you have pulse service, you can still use these special tone services by following these steps.

1.Be sure DIAL MODE is set to P.

2.Dial the service’s main number.

3.When the service answers, press TONE () on the handset. Any addi- tional numbers you dial are sent as tone signals.

4.When you hang up, the phone auto- matically resets to pulse dialing.

USING PAGE/INTERCOM

You can use the TAD-797 as a two-way pager and intercom between the base and the handset. This is useful if the handset is away from the base and you want to lo- cate it, or if you want to have a conversa- tion between someone with the handset and someone at the base.

To page the base from the handset, press INTCM. Paging Base appears on the handset display, and both the base and handset ring. Press SPEAKER or INTER- COM on the base to answer the page. The handset display changes to Intercom.

19