You will need the following equipment to complete the cooker installation satisfactorily
STABILITY BRACKET
If the cooker is to be supplied with gas through a flexible hose, a stability bracket or chain must be fitted.
These are not supplied by with the cooker but
are available at most builders merchants.
GAS PRESSURE TESTER
FLEXIBLE GAS HOSE Must be in accordance with the relevant standards. For LP Gas it should be suitable for LPG, capable of 50mbar pressure, 70°C temperature rise and carry a red stripe, band or label
MULTIMETER
(for electrical checks)
You will also need the following tools:
1.Electric drill
2.Masonry drill bit
(only required if fitting the cooker on a stone or concrete floor)
3. Rawlplugs
(only required if fitting the cooker on a stone or concrete floor)
4.Steel tape measure
5.Cross head screwdriver
6.Flat head screwdriver
7.Spirit level
8.Pencil
9.Adjustable spanner
10.Screws for fitting stability bracket
23
