Manuals / Rangemaster / Kitchen Appliance / Range

Rangemaster Toledo 90 Gas You will also need the following tools, Rawlplugs

Models: Toledo 90 Gas

1 32

Download 32 pages 13.47 Kb

Page 24

Image 24

You will need the following equipment to complete the cooker installation satisfactorily

STABILITY BRACKET

If the cooker is to be supplied with gas through a flexible hose, a stability bracket or chain must be fitted.

These are not supplied by with the cooker but are available at most builders merchants.

GAS PRESSURE

TESTER

FLEXIBLE GAS HOSE

Must be in accordance with the relevant standards. For LP Gas it should be suitable for LPG, capable of 50mbar pressure, 70°C temperature rise and carry a red stripe, band or label

MULTIMETER

(for electrical checks)

You will also need the following tools:

1.Electric drill

2.Masonry drill bit

(only required if fitting the cooker on a stone or concrete floor)

3. Rawlplugs

(only required if fitting the cooker on a stone or concrete floor)

4.Steel tape measure

5.Cross head screwdriver

6.Flat head screwdriver

7.4mm & 3mm Allen keys

8.Spirit level

9.Pencil

10.Adjustable spanner

11.Screws for fitting stability bracket

Page 24

Image 24

Rangemaster Toledo 90 Gas You will also need the following tools, Electric drill 2. Masonry drill bit, Rawlplugs

Contents

Installation Instructions Toledo 90 Gas Users GuideU1 Contents PageBe safe Gas and Electricity onPeculiar smells 2 Minute Tour continues over the page2 Minute Tour - continued The GriddleTHE GRIDDLE Natural gas cookers LP gas cookersNever close the grill door when the grill is on 2 Minute Tour continues over the page6 Slow cooking Oven light2 Minute Tour - continued THE MAIN GAS OVEN More about the oven on pageTo set the time of day THE TALL OVEN ELECTRIC More about the tall oven on pageTHE CLOCK More about the clock on page The hotplate burners The OvensThe Grill The Main gas ovenMain Oven shelves The HandyrackTall oven shelves The Tall electric ovenMain Oven cooking guide Tall Oven cooking guide Thoroughly thaw frozen joints and poultry before cookingTHOROUGHLY THAW FROZEN POULTRY BEFORE COOKING OvenCooking using the timer ‘S’ Slow cookingMain ovenThe clock Cleaning your cooker Hotplate burnersEssential information The LH hotplateGrill Control Panel and DoorsThe Main Oven Cookers with window doorsThe Main Oven side linings The Tall OvenRemoving the Oven Linings Moving your cooker Troubleshooting Problems with the burner main ovenElectrical Problems Troubleshooting Grill Ignition faultyGeneral Safety Instructions 0800IF YOU SMELL GAS Take care that no water seeps into the appliance Dear Installer Before you start your installation, please complete the details BELOWInstaller’s Name Installer’s Company Installer’s Telephone number Thank youYou must be aware of the following safety requirements & regulations Provision of VentilationLocation of Cooker An appliance for use on LPG shall not be installed9. Pencil 10. Adjustable spanner You will also need the following tools1. Electric drill 2. Masonry drill bit 3. RawlplugsPositioning the Cooker Unpacking the CookerChecking the parts Moving the Cooker LevellingPressure testing Fitting a stability bracketGas Connection view from the rear A position for gas supply connectorElectrical Connection Electrical checksGrill check Hotplate checkMain Oven check Tall ovenFitting the plinth Customer careCircuit Diagram Technical Data DimensionsThis cooker is designed for use on either Connections