2-4.Desktop CCD Camera Installation

This section describes how to connect a CCD camera and install the driver.

Follow the steps to connect a CCD camera.

1.Connect the optional AC adapter(sold separately) to the CBFW3. 2.Connect a CCD camera to the CBFW3 with an IEEE1394 6pin-6pin cable. 3.You can connect the CCD camera without turning off the PC or CCD camera.

6pin-6pin cable

AC Adapter

(Not include)

(Not include)

When your Windows version is Windows 98 SE(Second Edition), go to the Chapter 2-4-1. When your Windows version is Windows 2000, go to the Chapter 2-4-2.

When your Windows version is Windows Me(Millennium Edition), go to the Chapter 2-4-1.

NOTE

1.The 6 pin to 6 pin cable is not included in the CBFW3 package. You can order this cable. Refer to the Chapter 10.

2.The CCD camera doesn’t work without a power source, typically DC +12V, 1.2A. You can use our optional AC power adapter, DC +12V, 1.2A. You can order this AC power adapter. Refer to the Chapter 10.

21