APPENDIX

Inside Air Contamination

All heaters experience some condensation during start-up. The condensate from flue gas is acidic. Combustion air can be contaminated by certain vapors in the air which raise the acidity of the condensate. Higher acidity levels attack many materials including stainless steel, which is commonly used in high effi- ciency systems. The heater can be supplied with cor- rosion-resistant, non-metallic intake air vent material. You may, however, choose to use outside combustion air for one or more of these reasons:

1.Installation is in an area containing contaminants listed below which will induce acidic condensation.

2.You want to reduce infiltration into your building through openings around windows and doors.

3.You are using AL29-4C stainless steel vent pipe, which is more corrosion-resistant than standard metallic vent pipe. In extremely contaminated ar- eas, this may also experience deterioration.

Products causing contaminated combustion air:

•spray cans containing chloro/fluorocarbons

•permanent wave solutions

•chlorinated waxes/cleaners

•chlorine-based swimming pool chemicals

•calcium chloride used for thawing

•sodium chloride used for water softening

•refrigerant leaks

•paint or varnish removers

•hydrochloric acid/muriatic acid

•cements and glues

•antistatic fabric softeners used in clothes dryers

•chloride-type bleaches, detergents, and cleaning solvents found in household laundry rooms

•adhesives used to fasten building products

•similar products

Areas where contaminated combustion air commonly exists:

•dry cleaning/laundry areas

•metal fabrication plants

•beauty shops

•refrigeration repair shops

•photo processing plants

•auto body shops

•plastic manufacturing plants

•furniture refinishing areas and establishments

•new building construction

•remodeling areas

•open pit skimmers

Check for areas and products listed above before in- stalling heater. If found:

•remove products permanently, OR

•install TruSeal direct vent

53

Page 52 Page 54
Page 53
Image 53
Raypak 302A-902A manual Appendix, Inside Air Contamination
Page 52 Page 54

302A-902A specifications

The Raypak 302A-902A is a highly regarded pool and spa heater, known for its efficiency and reliability in delivering warmth to residential and commercial aquatic applications. This heater stands out due to its robust design, advanced technology, and user-friendly features.

One of the key characteristics of the Raypak 302A-902A is its dual fuel capability, which means it can run on either natural gas or propane. This flexibility allows users to choose their preferred fuel type, contributing to operational efficiency and cost-effectiveness. With a BTU output ranging from 302,000 to 902,000, the Raypak heater is capable of quickly heating large volumes of water, making it ideal for pools, spas, and hot tubs.

The heater incorporates advanced technology such as a stainless steel heat exchanger, which not only ensures excellent thermal conductivity but also promotes durability against corrosion. This is especially advantageous in harsh environments, where exposure to chemicals can significantly impact the lifespan of traditional copper heat exchangers. The Raypak 302A-902A's heat exchanger is designed to withstand the rigors of constant use while maintaining high performance levels.

Another prominent feature of the Raypak 302A-902A is its digital display control system, which simplifies the operation and monitoring of the heater. Users can easily set and adjust temperatures, as well as access diagnostic information, all through an intuitive interface. This digital control not only enhances user experience but also aids in the timely maintenance of the unit.

Energy efficiency is another major selling point of the Raypak 302A-902A. The heater is designed with environmentally friendly practices in mind, utilizing a low NOx burner that minimizes harmful emissions. This not only meets environmental regulations but also makes it a greener alternative for heating needs.

In terms of installation, the compact design of the Raypak 302A-902A allows for versatile placement options, whether in a residential backyard or a commercial environment. Its user-friendly installation process ensures that homeowners and businesses alike can enjoy the benefits of heated water with minimal hassle.

Overall, the Raypak 302A-902A is an exemplary choice for anyone seeking a high-quality, efficient, and flexible pool and spa heating solution. Its combination of robust engineering, advanced technology, and user-focused features solidifies its position as a leader in the market, promising effective heating for years to come. Whether for personal enjoyment or commercial use, this heater delivers exceptional performance that meets diverse heating needs.
Top Page Image Contents