RCA 27V514T manual Plug in the TV, Put Batteries in the Remote, Turn on the TV

Connections & Setup

Plug in the TV

Plug the end of the power cord into a grounded wall outlet. Insert the plug completely into the outlet.

Put Batteries in the Remote

•Remove the battery compartment cover from the back of the remote by pushing down and sliding off the cover.

•Insert 2 fresh “AA” batteries. Make sure the polarities (+ and -) are aligned correctly to the diagram inside the battery compartment.

•Replace the cover.

How to Use the Remote Control to

Complete the Initial Setup

The technical term is “Navigation” - how you move through the on-screen menus. The method is the same throughout the menu screens: highlight your choice and select it.

To highlight a menu item, press the arrow buttons on the remote to highlight one of the items listed on the screen. Use the up or down arrow button to move up or down. Use the right or left arrow button to move right or left.

To select the item that you’ve highlighted, press OK.

	Note: Highlighted means that the menu item stands out from
	other menu items on the list (appears darker, brighter or a
OK button	different color).

Turn on the TV

Press ON•OFF on the remote, or press POWER on the TV’s front panel.

Arrow buttons

10 Chapter 1