RCA BD1900 Plug in the TV/DVD, Put Batteries in the Remote, Turn on the TV/DVD, Initial Setup

Connections & Setup

Plug in the TV/DVD

Plug the end of the power cord into the wall outlet. Match the wide blade of the plug with the wide slot in the outlet. Insert the plug completely into the outlet.

Put Batteries in the Remote

1.Remove the battery compartment cover on the remote.

2. Insert new batteries. Match the polarities (+ and -) on the batteries with the diagram on the remote.

3. Put the battery compartment cover back on the remote.

ENTER

Use the arrow buttons and the ENTER button to move through the menu system.

How to Use the Remote Control to Move Through the Menus

The technical term is “Navigation” – how you move through the on-screen menus. The theory is the same throughout the menu screens: highlight your choice and select it.

To highlight a menu item on the screen, press the arrow buttons on the remote to highlight one of the items listed on the screen. Use the up or down arrow button to move up or down. Use the right or left arrow button to move right or left.

Note: Highlighted means that the menu item stands out from other menu items on the list (appears darker, brighter, or a different color).

Turn on the TV/DVD

Press the ON/OFF button on the remote control or the POWER button on the TV/DVD’s front panel.

Note: Pressing the ON/OFF button not only turns on the TV, but puts the remote into TV mode. “TV mode” means that the buttons on the remote control operate the TV’s functions.

Initial Setup

The first time you turn on your TV/DVD, you’ll want to set a few menu screens so that you get the optimum performance from your TV/DVD. Complete the following steps to set up your TV/DVD.

12 Chapter 1