RCA CC543 warranty Tapes on a VCR

@Attach the wh te plug on one end of the audiofvide, b cable to the AUDIO IN jack on the,W,or VCR.

IN jacks, attach the

MONO. If one of

1.A. Camcorder c0n&ted directly to TV monitor: jTu$ on the TV and tune it to its videQ input channel.

2.Press and hold t e $a11 button on the camcorder’s PO

02 Attach the yellow plug on the same end of the audio/video cable to the VIDEO IN jack on the TV or VCR.

03 Attach the yellow plug on the other end of the audio/video cable to the yellow VIDEO jack and the white plug to the white AUDIO jack on the side of the camcorder.

0
4 Place the AV OUTIIN switch/to OUT.
Tapes on a VCR	_J _” i

sliding it to VCR. Insert the cassette you want to playback (or copy).

Note: The camcorder can only play back tapes recorded at the SP speed.

3.Press PLAY on the camcorder. To copy what the camcorder is playing, place a blank cassette in the VCR and start the VCR recording. Adjust the tracking on the camcorder if necessary. Details are on page 51.

• During playback, use the playback features described on page 51.

4.Press STOPJEJECT when you are finished.

Watching What Ithe’Capcorder is Seeing or Recording on the TV ‘*Y-F-‘,

1.A. Camcorder c nn&ted directly to

TV: Turn on 4the $V, and tune it to its video inpu k chpnnel.

B.Camcorder c nne$ted to VCR that is already co necfed to TV: Turn

on VCR and ilack it in the “line” or “camera” mo e . (If your VCR does not have a “ii e” br “camer$‘.+..

mode, consul the! VCk owner’? manual.) Op rat{~ the ?‘V as you normally do t set the’ signal

coming from he VCR.

:

I

2. Press and hold the small button on the camcorder’s POWER switch while sliding it to CAMERA. Insert the cassette you want to record on.

Note: When the camcorder is used as a camera, turn the TV’s volume down to prevent a high-pitched squeal caused by feedback.

3.Press the camcorder’s RECIPAUSE butt& to begin recording. You can watch what the camcorder is seeing or recording on the TV screen.

53

I’