RCA CC543 warranty Transformer @AVOITIINSwitch

1	To connect your camcorder to a TV without audio and video input jacks, you will need
I	an optional RF output adapter and an optional coaxial RF cable.

Optional 300/75 o h m .		,
	Transformer	I	” @AVO(ITIINSwitch -
	( s u c h a s 1 9 3 9 8 3 )
----__
t	‘I,

1

Optional ’

Transf

O p t i o n a l C o a x i a l R F C a b l e

(such as AHO65G or AH066G) TO TV

I;

!

01

54

Disconnect the VHF antenna from your TV. If you are going to leave the RF adapter connected to the TV, connect the antenna to the RF output adapter.

A.If antenna is round 75-ohm cable, connect it to IN FROM ANT connector on RF output adapter.

B.If antenna is flat twin-lead, connect flat-lead connectors to screw terminals on optional 300- 75 ohm transformer. Then connect transformer to IN FROM ANT connector on RF output adapter.

02 Attach one end of coaxial RF cable to OUT TO TV connector on RF adapter, and attach other end of the cable to VHF input on TV as shown.

Note: If TV has screw terminals, you may need an optional 75-to-300 ohm transformer, such as AH01 1.

03 Attach RF output adapter’s yellow plug to the VIDEO jack, small plug to the RF DC OUT jack, and white plug to the AUDIO jack on the side of the camcorder.

04 Place the AV OUTIIN switch to OUT.