RCA CC634 manual Powering Your Camcorder, Using the Adapter/Charger to Power Your Camcorder

Powering Your Camcorder

Using the Adapter/Charger to Power Your Camcorder

The power connector attaches to the camcorder and lets you power your camcorder directly from standard household power. The adapter/charger operates on 100-240 volts, 50/60 Hz, so it can be used virtually anywhere in the world to power the camcorder or recharge the battery.

To AC 100-240V,

50/60 Hz

Power Connector

POWER	CHG
	END

REFRESH

POWER

Indicator

DC OUT Jack

– +

VCR

POWER

OFF

CAMERA

		AUDIO
BATT.		RF
	RELEASE	DC OUT
		VIDEO

L E N S C O V RE

BATT. RELEASE Button

Attach Adapter/Charger

1.Plug power connector’s plug into DC OUT jack on adapter/charger.

2.Align the reference mark on the power connector with the mark on the camcorder. Hold the top of the power connector flush against the back of the camcorder, and press the bottom of the power connector onto the camcorder until it locks into place.

3.Plug the adapter/charger’s plug into the nearest AC outlet (100-240V, 50/60Hz).

4.If the adapter/charger is properly connected, its POWER indicator will light.

Caution: Do not use this adapter/charger for any other purpose other than charging the FB1260 or FB120 battery pack or supplying power to the camcorder.

Remove Adapter/Charger

1.Unplug the adapter/charger from the wall outlet.

2.Press and hold BATT. RELEASE on the camcorder while removing the power connector.

Using an Optional Plug Adapter

An optional plug adapter may be required in some countries.

Optional AC

AC 100-240V

Plug Adapter

1.Plug the adapter/charger’s plug into the AC plug adapter.

2.Plug the AC plug adapter into the AC outlet.

11