Powering Your Camcorder

Using the Battery to Power Your Camcorder

The battery must be charged as described on the previous page before it can be used the first time. Initial charging will take approximately 70 minutes. When fully charged, the battery should supply about 55 minutes of operating time (depending on how much you use the light, zoom, and pause). Conserve battery power by turning the camcorder off during recording breaks.

Note: The small marker switch on top of the battery is for use as a personal reminder to help you remember to recharge the battery. It has no other function.

Reference Marks

 

 

 

 

 

L

 

 

 

 

 

E

 

 

 

 

 

N

Marker

 

 

 

 

S

 

+

 

B C

C

 

 

R

 

 

 

 

 

O

 

 

 

 

V

 

 

 

 

E

Switch

 

 

 

 

 

 

 

 

 

VCR

 

 

 

 

 

POWER

 

 

 

 

 

OFF

 

 

 

 

 

CAMERA

 

 

 

 

 

AUDIO

 

 

 

BATT.

 

RF

 

 

 

RELEASE

DC OUT

 

 

 

 

 

 

 

 

 

 

VIDEO

 

BATT. RELEASE

 

 

 

 

POWER

 

 

 

 

(VCR/OFF/CAMERA)

Button

 

 

 

 

Switch and Indicator

Battery Safety Precautions

Do not short the battery’s terminals.

Do not attempt to disassemble or modify the battery. There are no user-serviceable parts inside.

Use the battery only with specified adapter/chargers and camcorders.

Throwing the battery into a fire or exposing to excessive heat – over 149ºF (65ºC) could be hazardous.

Attach the Charged Battery

If the power connector is attached to the camcorder, remove it before attaching the battery. Also, install the lithium clock cell before attaching the battery pack. Details on page 46.

1.Align the reference mark on the battery with mark on back of camcorder.

2.Hold the top of the battery flush against the camcorder and press the bottom of

the battery down until it locks into place.

3.Place the POWER switch in CAMERA. The power indicator will light.

Remove the Battery

Press and hold BATT. RELEASE on the camcorder while removing the battery.

ATTENTION: The RBRC seal on the battery used in your Thomson Consumer Electronics product indicates that we are participating in a program to collect and recycle Nickel Cadmium batteries throughout the United States. Please call 1-800-8-BATTERY for information or contact your local recycling center.

RBRC RBRC Ni-Cd

13

Page 15
Image 15
RCA CC634 manual Using the Battery to Power Your Camcorder, Battery Safety Precautions, Attach the Charged Battery