Connections and Setup
4.Highlight the channel you have to tune your TV to see cable box programming, and press OK (a screen appears reminding you to connect your
Notes: This screen only appears if Cable Input was selected in the previous screen.
Channel 03 is the most common.
5.Highlight your brand of cable box, and press OK.
If your brand isn’t listed, highlight Not Listed and press OK.
6.Make sure your cable box is on.
Tune the cable box to channel 02 (use the remote control that came with your cable box, or press the channel buttons on the cable box).
Press OK (the TV Guide On Screen system starts testing codes).
Important Note: When code testing is in progress, don’t touch your TV, cable box or any of the remote controls for these products. Make sure the placement of the
7.Look at your cable box. If it is still on and changed to channel 09, the test was successful. Highlight Yes, and press OK (STEP 3: Configuring for Antenna appears).
If your cable box didn’t change to channel 09 or turned itself off, you have two choices: No and Test this code again.
Test this code again: If the
No: If you don’t think the test was interrupted, highlight No and press OK (TV Guide On Screen system tests the next code).
Repeat the previous instructions until the TV finds the correct cable box code. Follow the instructions on the screen.
Note: If the TV can’t find your cable box code, a troubleshooting checklist appears. Carefully review the checklist and follow the instructions on the screen.
Chapter 1 | 23 |