Chapter 3: Using the TV’s Menu System
How to Use Your TV’s Menu System
Use the buttons on the remote or the front of your TV to access the menu system and make changes to the settings.
MAIN MENU
1 Audio
2 Picture Quality
3 Channel
4 Access & Power Options
5 Closed Captioning
6 Time and Timers
7 Parental Controls
8 Menu Language/Idioma/Langue
0 Exit
AUDIO
1 Mute
2 Audio Levels
3 Audio Processor
4 Audio Output & Speakers
5 Sound Logic
0 Exit
AUDIO PROCESSOR
1 Expanded Stereo
2Stereo
3 Mono
4 Second Audio Program (SAP)
Models other than J20542 and J25400 will feature these options under Audio Processor.
AUDIO PROCESSOR
Menus
Press MENU on the remote or on the front panel to bring up the Main menu.
There are two ways to select a choice in a menu:
•Use your arrow buttons on your remote control to highlight your choice, and press OK.
•Press a number button on the remote. For example, in the Main menu press 3 to go straight to the Screen menu.
Exiting a menu
There are three ways to exit a menu:
•Highlight Exit and press OK.
•Press 0 on the remote.
•Press CLEAR.
Audio Menu
Mute Switches audio muting on or off.
Audio Levels Allows you to adjust the TV’s Balance, Treble, Bass, Initial Volume and Maximum Volume. These options aren’t available to the basic user. Go to Chapter 1 for more information.
Audio Processor Controls the available audio modes, which control the way the sound comes through your speakers.
Expanded Stereo* Electronically “widens” sound from stereo broadcasts, stereo VCRs, digital satellite systems, DVD players, and laserdisc players for a fuller, more spacious sound. This choice will not be present if Fixed Output, Speakers Off is selected from Audio Output & Speakers.
Stereo* Splits the incoming stereo audio signal into left and right channels. Most TV programs and recorded materials have stereo audio. The TV displays the word STEREO when you tune to a program that is broadcast in stereo.
Mono Plays the sound in mono only (same signal sent to all speakers). Use this setting when receiving broadcasts with weak stereo signals.
Second Audio Program (SAP) Plays the program’s audio in a second language, if one is available. The TV displays the word SAP when you tune to a program that is broadcast with SAP information. SAP audio is broadcast in mono. SAP is also used to broadcast a program’s audio with descriptions of the video for the visually impaired.
Volume Hold (for models J20542 and J25400) This menu item is available for all models, but is listed under the Audio Output & Speakers option. Lets you turn Volume Hold on or off.
1 Mono
2 Second Audio Program (SAP)
J20542 Audio Processor menu
AUDIO PROCESSOR
1Stereo
2 Mono
3 Second Audio Program (SAP)
Audio Output & Speakers* Lets you turn the TV’s internal speakers on or off and set the audio outputs to
Sound Logic This option isn’t available to the basic user. Go to Chapter 1 for more information.
J25400 Audio Processor menu
*This feature is not available on model J20542. Expanded Stereo and Audio Output & Speakers are not available on model J25400.
16 | Graphics contained within this publication are for representation only. | Chapter 3 |
