RCA RC5920P manual DVD Player + TV with Audio/Video Input Jacks, Go to

Connections & Setup

TV

AUDIO OUT

RL

	AUDIO IN
S-VIDEO	VIDEO IN	L	ANT IN
	R

CABLE

OR

OFF-AIR SIGNAL

TV

DVD

PLAYER

DVD

					1
2A
2B
OPTICAL	COAXIAL				VIDEO
					OUT
		L
			1	2	VIDEO	Pr
				L			COMPONENT	3
				R		Pb	VIDEO OUT
						Y
DIGITAL OUT			AUDIO OUT		S-VIDEO

DVD Player + TV with Audio/Video Input Jacks

1.Connect the audio cables to the AUDIO OUT L (left – white) and R (right – red) jacks on the back of your DVD Player, and to the corresponding Audio Input jacks on your TV.

2.Connect the video cable.

A.Basic video connection – Connect the video cable (yellow) to the VIDEO OUT jack on the back of your DVD Player, and to the Video Input jack on your TV.

OR

B.S-Video– (optional) If your TV has an S-Video Input jack, connect the S-Video cable to the S- VIDEO OUT jack on the back of your DVD Player and to the S-Video jack on your TV. If your TV doesn’t have S-Video, use the basic video connection listed above.

OR

C. Component video (optional, not shown in illustration) – If your TV has component video (Y, PB, and PR jacks) use video-grade cables for the Y, PB, and PR connections. Note that it is essential to match the color-coded connectors with a compatible TV. If your TV doesn’t have component video, use the basic video connection or the S-Video connection listed above.

3.Plug in the AC power cord into an AC outlet.

Note: Your cable or off-air connection to the television should not be affected by this connection. Connect your cable or off-air antenna to your television as you normally would. You may need to consult your television manual for details.

Go to page 20

Chapter 1 9