RCA RC5920P manual DVD Player + TV + Dolby Pro Logic or Stereo Receiver

Connections & Setup

DVD Player + TV + Dolby Pro Logic or Stereo

Receiver

To Connect the DVD Player

1.Connect the left and right audio cables to your audio/video receiver and to the AUDIO OUT FRONT L (left – white) and R (right – red) jacks on the back of your DVD Player.

2.Connect the video cable.

A.Basic video connection – Connect the video cable (yellow) to the VIDEO OUT jack on the back of your DVD Player, and to the Video Input jack on your TV.

OR

B.S-Video– (optional) If your TV has an S-Video Input jack, connect the S-Video cable to the S- VIDEO OUT jack on the back of your DVD Player and to the S-Video jack on your TV. If your TV doesn’t have S-Video, use the basic video connection listed above.

OR

C. Component video (optional) – If your TV has component video (Y, PB, and PR jacks) use video-grade cables for the Y, PB, and PR connections. Note that it is essential to match the color coded connectors with a compatible TV. If your TV doesn’t have component video, use the basic video connection or the S-Video connection listed above.

3.Plug in the AC power cord into an AC outlet.

Go to page 20

Chapter 1 15