Chapter 1: Connections and Setup
9V 
POWER
2
1
3
CHANNEL
1 2 3 4 | LINE OUT |
Important: Make sure to push the plug of the audio cable all the way into the LINE OUT jack.
Connecting the Lyra Wireless Receiver to your Audio Receiver
1.Connect the small end of the audio cable to the LINE OUT jack on the back of the Lyra Wireless receiver and the other ends (the red and white plugs) to the Audio Input jacks (sometimes labeled Aux or Line ) on your audio receiver. Also, make sure to put your audio receiver in the right mode to receive the sound from those jacks (see your audio receiver’s owner’s manual for more information).
2.Connect the small end of the small power supply to the power jack on the back of the Lyra Wireless receiver and the other end into an AC outlet.
3.Make sure the CHANNEL switch is set to the same channel as the CHANNEL switch on the Lyra Wireless transmitter.
4.Raise the antenna on the front of the unit so it is straight up.
5.Position the receiver so that it is facing in the general direction of the transmitter.
8 | Chapter 1 |
