111
E-DOC-CTC-20051017-0148v1.0
Chapter 5
SpeedTouch™ Web Interface
5.6.8 Interface Settings
Overview The Overview page gives you an overview of the current interface settings.
Configure The Configure page allows you to:
Change the IP address settings of the SpeedTouch™.
Change the DHCP IP address pool settings.
Assigning a new IP
address to the
SpeedTouch™
Under IP Addresses, proceed as follows:
1Type the IP address of your choice (for example 192.168.1.1) in the left text
box.
2Type subnet mask (for example 255.255.255.0) in the right text box.
3Click Add.
Network devices using the same subnet mask can now access the
SpeedTouch™ using this IP address.
!Before changing the DHCP pools, make sure that at least one IP
address of the SpeedTouch™ uses the same subnet as the IP
addresses in the DHCP pools.