Components of the Dhcp Pool | RCA SpeedTouchTM706 instruction

Components of the DHCP Pool page

Chapter 5

SpeedTouch™ Web Interface

The following settings are available for configuration:

Interface:

The SpeedTouch™ interface to which the DHCP pool applies.

Start Address:

The start IP address of the DHCP server’s address pool.

End Address:

The end IP address of the DHCP server’s address pool.

Both the start and end IP address define the IP address range used by the DHCP server to assign leases.

Subnet Mask:

The subnet mask of the DHCP server’s address pool.

Server:

The SpeedTouch™ IP address used as DHCP server address.

Gateway:

The IP address that will be assigned to the DHCP clients as their default gateway.

Primary DNS:

The IP address of the primary DNS server.

Secondary DNS:

The IP address of the secondary DNS server.

Primary WINS:

The IP address of the primary WINS server.

Secondary WINS:

The IP address of the secondary WINS server.

Lease Time:

The time for which the DHCP client is allowed to use the assigned IP address:

If you select Always give same address to DHCP clients, the lease time will be automatically set to Infinite.

Always give same address to DHCP clients:

Select this check box if you always want to use the same IP address for the DHCP clients.

E-DOC-CTC-20051017-0148 v1.0	113

Image 121

RCA SpeedTouchTM706 manual Components of the Dhcp Pool

Contents

SpeedTouch706 WL Page SpeedTouch 706 WL Trademarks CopyrightDocument Information Contents Voice over IP Iii Troubleshooting About this User’s Guide Terminology Documentation and software updates About this User’s Guide Getting to know your SpeedTouch SpeedTouch LED Behaviour Indicator Description Name Colour State Wlan Access Method Can be used to Accessing your SpeedTouch To access the SpeedTouch via the Web interface Access via the Web Interface To access the SpeedTouch via the Command Line Interface CLI Access via CLIFor more information, see Quote site command on To start a Telnet session Select All Programs Accessories Command Prompt Open a Command Prompt window Access via FTP Use Command Common FTP commands Ftp quote site ip iplist To disable remote access To access the SpeedTouch remotely To enable remote accessRemote Assistance Chapter Wired Ethernet Local Network Setup For more information, see Device settings on Wired Ethernet Supported operating systems USBSystem requirements Windows Found New Hardware Wizard appears To install Windows USB drivers Chapter Introduction Wireless client requirements Wireless Ethernet Wireless Basics Chapter Wireless default settings Connecting Wireless Clients for the First TimeWireless Security on Click Connect Anyway First-time association example Name Ssid Wireless Security Security disabled default Search for wireless devices taskWEP Wired-Equivalent Privacy WPA-PSK Wi-Fi Protected Access Pre-Shared Key Security issues Registering wireless clients Connecting Additional Wireless ClientsClick Configure Registering clients via Web pages Registering clients via the association button Wireless Distribution System WDS Extending the Range of Your Wirelstess Network Chapter SpeedTouch Internet Connectivity Dial-In ClientsWeb Pages Internet Gateway See 3.1 SpeedTouch Web Pages on page 33 to proceed If your computer runs You can use Introduction Starting an Internet session SpeedTouch Web PagesMonitoring your Internet connection Terminating an Internet session Internet Gateway Device Control Agent Internet connection status Terminating an Internet session Voice over IP Voice over IP SpeedTouch VoIP solutionUniform Resource Identifier URI Telephony Setup Configure the telephony service Enable the telephony serviceSelect Service Enabled Verifying telephone connectivity Pick a task list, click Use multiple identities Pick a task list, click View telephony statistics and logs Supported telephony services Supplementary Telephony ServicesService Description Phone on Pick a task list, click Configure telephony services Deactivating services on your telephone To use the service Proceed as follows Using the services on the phone Phone command Is used to SpeedTouch SpeedTouch Web InterfaceDocumentation Menu Language Bar Navigation Bar Notification Area Tasks Navigation Collapsing MenuExpanding the menu Language Bar Navigation Bar Notification Area Tasks SpeedTouch home HomeSpeedTouch Broadband Connection Toolbox Home Network SpeedTouch Information Configuration Event Logs Information SpeedTouch Easy Setup Restarting your RestartClick Yes, restart my SpeedTouch. The SpeedTouch restarts Configuration Accessing the Backup & Restore Back up & RestoreSaving your current configuration Restoring a previously saved configuration Resetting the SpeedTouch factory defaults Reset to Factory Defaults Event Logs Indicator Description Broadband Connection DSL Connection Internet ServicesBroadband Connection menu Pick a task list, click Check connectivity to the Internet Connectivity CheckClick Check Connectivity DSL Connection Internet Services Accessing the Internet Service Settings Overview Internet Service SettingsBroadband Connection menu, click Internet Services Toolbox Enabling Remote Assistance Username PasswordTerminating remote assistance Last and First Name Address BookMail address For more information, see 5.5.4 Telephony Statistics on Telephony Registrar Port RegistrarProxy Proxy Port Telephony services table SpeedTouch Web Interface Call Statistics Call Log Telephony Statistics Game & Application Sharing Chapter Defined Games & Applications Accessing the Defined Games & Applications Configure Under Accessing the Game or Application Definition OverviewGame or Application Definition Game or Application Name you can Adding a Port Translation rule Creating a new game or application New Game or Application Parental Control Allow access to a specific Web site Deny access to a specific Web siteRedirect a Web site Proceed as follows Allow is selected under Action for Unknown Sites Under Content Based Filtering you can Configure content based filtering settingsRedirecting all Web sites Click Redirect in the Action list Web Filtering Activation Accessing this page Proceed as followsWeb Filtering Activation Standard license activation Click Standard Accessing the Content Level Content LevelToolbox menu, click Parental Control Click Configure Icon Description Accessing the New Content Level New Content LevelContent level creation Proceed as follows Chapter Firewall DisabledStandard Creating a new security level Details of a security levelEditing a security level Proceed as follows Chapter Intrusion Detection Dynamic DNS On the Dynamic DNS page, click Configure User Privileges User Management Chapter Editing a user account Proceed as follows Edit UserToolbox menu, click User Management Changing the default user Change Default UserChange Default User page appears Add User Devices Home NetworkInterfaces Devices See 5.6.2 Device Settings on page 101 for more information Accessing the device settings Overview Device SettingsConnection Sharing 102 Assigning the public IP address to a device Assign Public IP Accessing the wireless Wireless Device SettingsDevice settings Accessing the Access Access Point SettingsPoint settings Broadcast Network Name Allow multicast from Broadband NetworkAllow New Devices Encryption Access control on the SpeedTouch Information, see 5.6.4 Wireless Device Settings on Click Configure Pick a task list, click Configure WDS Configuring WDSPick a task list, click Scan for wireless Access Points Establishing a WDS connection Interfaces Assigning a new IP address to the SpeedTouch Interface Settings Dhcp Pool Dhcp Pool Accessing the Dhcp PoolHome Network menu, click Interfaces Components of the Dhcp Pool 114 Troubleshooting SpeedTouch does not work SpeedTouch unreachable General SpeedTouch TroubleshootingPoor SpeedTouch Performance LANLEDdoesnotlightup Make sure that Wired Ethernet Troubleshooting Not able to connect wireless clients Wireless Ethernet Troubleshooting UPnP on Windows XP Systems Adding IGD Discovery Control Calling over Pstn Problems with supplementary services Voice over IP Troubleshooting Software reset Hardware reset Resetting your SpeedTouchPage Need more help?