Chapter 4

Voice over IP

Enable the telephony service

Proceed as follows to enable the telephony service:

1Go to the SpeedTouch™ Web pages.

For more information, see “1.2.1 Access via the Web Interface” on page 7.

2In the menu, select Toolbox > Telephony.

3In the upper right corner, click Configure.

4Select Service Enabled.

5Click Apply.

Assign phone numbers Proceed as follows to configure your Internet SIP telephone numbers:

1Go to the SpeedTouch™ Web pages.

2In the menu, select Toolbox > Telephony.

3In the upper right corner, click Configure.

4Assign phone numbers to phone port 1 (FXS1) and phone port 2 (FXS2). If you want to use the same number for both ports, select Port ‘all’.

The phone numbers are provided by your provider.

5Click Apply.

Configure the telephony service

Proceed as follows to configure the SIP telephony service:

1Go to the SpeedTouch™ Web pages.

2In the menu, select Toolbox > Telephony.

3In the upper right corner, click Expert configure.

4Enter the IP address and the port number of the registrar and the proxy, as

E-DOC-CTC-20051017-0148 v1.0

39

 

Page 47
Image 47
RCA SpeedTouchTM706 manual Enable the telephony service, Configure the telephony service, Select Service Enabled