Realistic DX-440 warranty Using the Shoulder Strap, Just the signal quality

8. Rotate the BFO PITCH control to ad-	BFO PITCH	RF GAIN
just the signal quality.

	...	,		""		0."	."
	0co,
9. Rotate the RF GAIN control to
dampen strong signals. This dm im-	BFC PITCH					RF GAIN
	0co,					0."
prove signal clarity as well.
			""				."
						~
Note: Before choosing another band.
set the RF GAIN control to MAX, and	BFO PITCH					RF GAIN
move the BFO switch to the OUT	0co,		""		OJ
position.
						MIN	MAX
	iFMi					lock
	MONO STEREO				BFO
	~
	LAM~				--t-	OUT. .IN
	WIDE.NARROW.			OUT..IN

USING THE SHOULDER STRAP

To Attach The Shoulder Strap
1. Insert about five inches of the end of
the strap into the strap hanger.
2. Pull the free end of the strap upward,	Figure 1
and insert the end into the lower
edge of the strap buckle as shown
in Figure 1.

3. Pull at least three inches of the strap	------, Figure 2	Figure 3
end through the buckle. See Figure	More than 3··
2. Then bring the end of the strap	__ i
beneath the upper end of the buckle.	- T
	More than 2'"
Refer to Figure 3.

4.Pull the free end taught. Be sure that at least two inches of strap extend from the upper end of the buckle. Slip the extra strap beneath the belt loop. See Figure 4.

To remove the shoulder strap, follow	Figure 5	Figure 6	Figure 7
Figures 5, 6, and 7 to reverse the
procedure.

32 33