SE9

English

6. Set up

5.Tighten the mounting nut securely with the bar tip held up (SE9)(TORQUE: 8.9~11.7 N.m./90~120 kg- cm). Then check the chain for smooth rotation and correct tension while moving it by hand. If necessary, readjustment.

(1) Tighten

WARNING

It is very important to maintain the proper chain tension. Rapid wear of the guide bar or the chain coming off easily can be caused by improper tension. Especially when using a new chain, take good care of it since it should expand when first used.

BALANCE UNIT

1.Put on strap and attach unit to strap.

2.Depending on the working posture, slide clamp up or down until unit balances and the strap fits your body.

26

Page 26
Image 26
RedMax PSZ2401-CA manual SE9, Balance Unit