MA6
MA7
MA8
English
9. Maintenance
■SAW CHAIN
WARNING
It is very important for smooth and safe operation to keep the cutters always sharp.
Your cutters need to be sharpened when:
•Sawdust becomes
•You need extra force to saw in.
•The cut way does not go straight.
•Vibration increases.
•Fuel consumption increases.
Cutter setting standards:
WARNING
Be sure to wear safety gloves.
Before filing:
•Make sure the saw chain is held securely.
•Make sure the engine is stopped.
•Use a round file of proper size for your chain.
Chain type: | 90SG |
File size: | 5/32 in (4.0mm) |
Place your file on the cutter and push straight forward. Keep the file position as illustrated. (MA6)
After every cutter has been set, check the depth gauge and file it to the proper level as illustrated. (MA7)
WARNING
Be sure to round off the front edge to reduce the chance of kickback or
(1)Appropriate gauge checker
(2)Make the shoulder round
(3)Depth gauge standard
Make sure every cutter has the same length and edge angles as illustrated. (MA8)
(4)Cutter length
(5)Filing angle
(6)Side plate angle
(7)Top plate cutting angle
46
