RGB Spectrum Quadra User's Guide manual Word about Outputs, Word about Scan Rates

I N T R O D U C T I O N.

. A Word about Outputs ..

.

identical input and output channels.

Figure 1-2.Quadra block diagram

A WORD ABOUT OUTPUTS

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

As standard, Quadra provides four identical DVI-I output connectors — one per output channel. Each output connector is dedicated to a specific input channel, and each output connector supports one analog or one digital output.

Each channel’s input signals are converted to that channel’s selected output resolution (adjustable up to 1600 pixels by 1200 lines), with horizontal scan rates ranging from 12 to 125 kHz.

Note

For a selected output channel, both the analog and digital outputs can be used simultaneously, however, only one output resolution can be set.

A WORD ABOUT SCAN RATES

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Quadra specifications state that a channel’s output resolution is adjustable up to 1600 pixels by 1200 lines, and horizontal scan rates are adjustable from 15 to 125 kHz. However, users should be aware that there are several important constraints to system resolution, including:

•Maximum pixel clock (also known as “sample rate”)

•Maximum number of pixels that can be processed

350-7951 Quadra User’s Guide 4