RGB Spectrum Quadra User's Guide manual Quadra User’s Guide 123

TE C H N I C A L S P E C I F I C A T I O N S.

. Parameter Storage ..

.

~ADC gain and offset values for Red, Green, and Blue channels

~Brightness, Contrast, Hue, Saturation and Sharpness for each of three possible input sources (RGB, DVI, YUV)

•Image controls (Video) — The following parameters are stored for each video input:

~Input signal source

~Brightness, Contrast, Hue, Saturation, Filter settings, Aspect Ratio, and Over/Underscan mode for each of three possible input sources (Composite1, Composite2, S-Video)

•Output channel — The following parameters are stored for each Quadra output:

~Gamma

~Output sync source

~Background pattern type

~Background Red, Green, and Blue color values

•Output timing values — The following timing values are stored for each Quadra output:

~Timing preset name and number

~Horizontal front porch, sync width, back porch, and active area (in pixels)

~Vertical front porch, sync height, back porch, and active area (in lines)

~Horizontal and vertical frequencies

~Sync format

~Horizontal and vertical sync polarities

~Scanning system (interlace/progressive)

~Output reference mode

~Aspect ratio

•Image settings — The following parameters are stored for each channel:

~Enable

~Source rectangle dimensions (X, Y, width, height)

~Destination rectangle dimensions (X, Y, width, height)

•Mapping — The mapping of inputs is stored for each channel.

350-7951 Quadra User’s Guide 123