RGB Spectrum Quadra User's Guide manual Optional Items, Rack Moun TIN G

I N S T A L L A T I O N A N D S E T U P.

. Optional Items ..

.

OPTIONAL ITEMS

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

RGB Spectrum can optionally provide additional equipment that may be useful in installing and operating your Quadra system. The items listed below may be purchased separately from RGB Spectrum.

Table 2-2.Optional Items

Item	Part Number	Description
VGA Cable	520-0298-1	15-pin HD Male to 15-pin HD Male,
		6 ft. Use to connect your analog
		output/inputs to sources with a
		female VGA connector.
VGA-to-BNC	520-0251-1	15-pin HD Male to a 5 BNC cable
Adapter		bundle Male, 6 ft. 10 inches. Use to
		connect the analog output/inputs to
		sources with BNC connectors.

RACK MOUN TIN G

. . . . . . . . . . . . . . . . . . . . . . . . . . . . .

The Quadra chassis is designed to be mounted in a standard 19" rack. Use the following steps to rack mount the chassis:

1.Ensure that the Quadra chassis is positioned in the rack such that the side air intake and exhaust vents are not blocked.

2.Using four rack screws (not supplied), rack mount the unit from the front rack ears. Install the lower of the two mounting holes first. Rack threads may be metric or otherwise, depending upon the rack type.

Important

Do not use the Quadra as a shelf to support other pieces of equipment. If you do, the rack ears and mounting screws may be damaged.

3.For additional stability at the rear of the chassis, Quadra is provided with a rear rack bracket and extension arm. Attach the rear brackets to the rack adapter at the rear of your chassis.

4.Slide an extension arm through the slot on the rack adapter and attach the arm to the chassis.

5.Attach the arm to the rear bracket by means of the fasteners located in the arms.

350-7951 Quadra User’s Guide 9