RGB Spectrum Quadra User's Guide manual Help Text Input Load Command

LOADING INPUT

TIMING VALUES

. . . . . . . . .

O P E R A T I O N S.

. Understanding Auto Sync ..

.

Once a close match is found for each RGB input, Quadra tries to lock to it — or continues down the list until a “lock” is achieved.

To load a different set of parameters or “create” your own, Auto Sync can be disabled — and you can force Quadra to load a custom set of parameters.

Use the following steps to load timing values:

1.To discover which set of timing parameters are currently loaded, query the INputTiMing command for a selected input. Type:

INTM <input #> Enter

The display shows the input name and all the various parameters. If the name “Auto_1” appears, this indicates the active register for automatic settings when Auto Sync is enabled. (There are four “Auto_1” registers, one for each Quadra input.)

2.Request help text for the INputLOAD command. Type:

H INLOAD Enter

This action displays the command’s parameters and variables.

Figure 3-8.Help Text — Input Load Command

3.Show the timing list. Type:

TMLIST Enter

4.Review the Factory Timing List in detail, and note the timing parameters that most closely match the specifications of your input.

5.Turn off Auto Sync for the selected input. Type:

INAS <input #> OFF Enter

6.Load the desired timing parameters for the selected input. Type:

INLOAD <input #> <register #> Enter

7.Verify that the parameters are loaded by querying the command and the input. Type:

INTM <input #> Enter

8.Repeat from step 1 to load custom timings for additional inputs. Please note:

350-7951 Quadra User’s Guide 35