Water Temperature Setting

!DANGER: There is a hot water scald potential if the thermostat is set too high. Households with small children, disabled, or elderly persons may require a 120°F or lower thermostat setting to prevent contact with HOT water.

The temperature of the water in the water heater can be regulated by setting the temperature dial of the adjustable surface mounted thermostat located behind the jacket access panel.

Safety and energy conservation are factors to be considered when selecting the water temperature setting of the water heater’s thermostat. The lower the temperature setting, the greater the savings in energy and operating costs.

To comply with safety regulations the thermostat are factory set at 120°F or less where local codes require. This is the recommended starting point.

Water temperatures above 125°F can cause severe burns or death from scalding. Be sure to read and follow

the warnings outlined in this manual and on the label on the water heater. This label is located on the water heater near the thermostat access panel.

Mixing valves for reducing point of use water temperature by mixing hot and cold water in branch water lines are available. Contact a licensed plumber or the local plumbing authority for further information.

The chart below may be used as a guide in determining the proper water temperature for your home.

Time/Temperature Relationship in Scalds

Temperature

Time To Produce a Serious Burn

120°F

More than 5 minutes

125°F

11/2 to 2 minutes

130°F

About 30 seconds

135°F

About 10 seconds

140°F

Less than 5 seconds

145°F

Less than 3 seconds

150°F

About 11/2 seconds

155°F

About 1 second

Table courtesy of Shriners Burn Institute

1

L 10MAY

2002

3

L

 

 

EWT1L2S-203

 

 

 

 

RO BERTSHAW

 

 

2

L

 

 

 

4

L

 

 

EC O

:

83

 

 

 

 

DIFF

:

8

 

 

1

T

 

 

 

 

 

 

 

65

 

7

 

 

 

 

0

 

0

 

 

 

 

6

 

 

 

 

 

5

5

 

 

75

 

 

 

 

 

8

 

 

0

 

 

 

 

 

 

 

 

0

 

 

5

 

 

 

 

 

240Va c 30A C S6209N

4

T

2

T

If adjustment is necessary…

Turn off the power to the water heater.

Remove the jacket access panel.

Thermostat

Dial Pointer

Using a small screwdriver, set the thermostat dial pointer to

the desired temperature.

Replace the jacket access panel. Turn on the power to the water heater.

31

Page 31
Image 31
Rheem RS47-21BP, RS80-42BP Water Temperature Setting, Time/Temperature Relationship in Scalds, If adjustment is necessary…

RS47-21BP, RS80-42BP specifications

The Rheem RS47-21BP and RS80-42BP are innovative water heater solutions designed to meet the diverse needs of modern households. These models incorporate advanced technologies to enhance efficiency, performance, and user convenience.

The Rheem RS47-21BP is a 47-gallon heat pump water heater that provides a strong balance between performance and energy savings. One of its standout features is its impressive energy efficiency rating. This model utilizes heat pump technology harnessing ambient heat from the air to heat water, drastically reducing energy consumption compared to traditional electric water heaters. This results in lower utility bills and a smaller carbon footprint, making it an environmentally conscious choice.

On the other hand, the RS80-42BP is a larger 80-gallon heat pump water heater suitable for families with higher hot water demands. It offers a similar energy-efficient operation as the RS47-21BP but with an increased capacity. This model is perfect for households that require a reliable supply of hot water for multiple simultaneous uses, such as showers, dishwashing, and laundry. The unit's size is designed to cater efficiently to larger families or higher demand scenarios, making it an ideal choice for busy homes.

Both models are equipped with advanced smart technology, allowing the user to monitor and control the water heater remotely through a smartphone application. This feature provides real-time data on water usage and energy consumption, empowering users to manage their hot water needs proactively. Furthermore, the intuitive interface makes it easy to adjust settings, helping households maximize efficiency.

Additionally, Rheem has incorporated protective features in both models, including an intelligent self-diagnostic system that assists in troubleshooting. The LED display offers clear indications of operational status, making maintenance straightforward. Both units come with durable construction, designed to resist corrosion and prolong their lifespan.

Overall, the Rheem RS47-21BP and RS80-42BP represent the forefront of water heating technology, combining efficiency, smart technology integration, and ample capacity. These water heaters are not only reliable but also contribute significantly to energy savings, catering to both small and large household needs effectively.