Ricoh DSc428, DSc435, DSc445 Note, Note, Note, [Horiz.], [Horiz.], Important, DPress [OK] twice, A Press the {#} key, A Press the {#} key, BPress [Custom Size], B Press [Select Size]

Copying from the Bypass Tray

B Insert the paper with the side you want to copy facing up until you hear the beep, and align the paper guide to the paper size.

ZKVH130J

1: Extender

Important

❒If the guides are not flush against the copy paper, image skewing or misfeeds might occur.

Note

❒Do not stack paper over the lim- it mark, if you do image skew- ing or misfeeds might occur.

❒Swing out the extender to sup-

port paper sizes larger than A4L, 81/2" ⋅ 11"L.

❒Fan paper to get air between the sheets and avoid multi-sheet feeds.

C Select the paper type and size.

Note

❒When copying onto OHP trans- parencies or thick paper, see p.24 “When copying onto OHP Transparencies or Thick Paper”.

❒When copying on the back side of paper, see p.25 “When Copy- ing on the Back Side of the Pa- per”.

When copying onto standard size paperA Press the {#} key.

The "Bypass Tray Paper" screen is displayed.

B Press [Select Size]. 2

C Select the paper size.DPress [OK] twice.When copying onto custom size paper

A Press the {#} key.

BPress [Custom Size].

CEnter the vertical size of the pa- per using the number keys, and then press [#].

DEnter the horizontal size of the paper using the number keys, and then press [#].

Note

❒If [Horiz.] is not highlighted, press [Horiz.].

23