Copier Functions

If you selected (1-1, 1-2,…)A Press [Change] on the right hand side.

B Press [First Printing Page], and then enter the original page number from which to start printing using number keys, and then press the {#} key.

Note

❒To change the number entered, press [Clear] or the {Clear/Stop} key, and then enter a new number.

C Press [First Chapter No.], enter the chapter number from which to start numbering using the number keys, and then press the {#} key.

Note

❒You can enter between 1 and 9999 for the chapter number from which to start numbering.

D Press [Numbering from / to], and then enter the page number from which to start numbering using the number keys, and then press the {#} key.

E When page designation is com- plete, press [OK].

F Press [OK] 3 times.

Covers

You can use this function to create cover sheets by adding additional pages of different paper, or copying existing pages onto different paper.

Preparation

2

 

Before selecting this function, set the tray for front cover sheets. See “Cover Sheet Tray” in “Tray Paper Settings”, General Settings Guide.

Note

❒The cover sheet should be the same size and orientation as the copy pa- per.

❒You cannot use the bypass tray with this function.

❒When selecting Copy, select whether the front and back covers are copied one-sided or two-sided. See “Cover Sheet Tray” in “Tray Paper Settings”, General Settings Guide.

❖Front cover

The first page of originals is copied onto a specified cover sheet paper, or a cover sheet is inserted before the first copy page.

• Copy

•Blank

79