Copying from the Bypass Tray

❖Top to bottom

When Copying on the Back

Side of the Paper

Using the bypass tray, you can make copies on the back of paper which has already been copied on the other side.

Note

2

❒ Do not use paper that has already been copied onto by other equipment.

❒ Copies made on the back side of the paper should be originals with very little image area, such as text originals.

❒ If the paper is curled, straighten it out, and then insert it. If the paper is not straightened out, it can cause paper jams.

GCMRYO4E

-Original and paper orientations

Pay attention to the orientation of paper and originals.

❖Top to top

A Open the bypass tray, and then adjust the guides to the paper size.

B Gently insert the copied paper with the side you want to copy face up until the beeper sounds.

C Press the {#} key.

D Select the paper size.

E Select [Plain: Dup.Back] or [Thick: Dup.Back].

F Press [OK] twice.

G Place the originals, and then press

GCMRY03E

the {Start} key.

25