Copying

Colour Functions

Selecting a Colour Mode

Select a Colour mode that best suits your originals and copying require-

2 ments.

Reference

For colour images, see p.iii “What You Can Do with This Machine <Colour Functions/Colour Ad- justments>”

The following basic functions are explained in this section.

❖Auto Colour Selection

Judges the colour of the original automatically, and copies either in full colour or black/white.

❖Full Colour Copy

Copies by overlaying yellow, ma- genta, cyan, and black.

❖Black/White Copy

Copies in black regardless of the colour of the original.

•Two Colour Copy (Red & Black) Copies the red part in red, and all the other parts in black or white.

Note

❒When the width of the colour is set to “Wider”, colours close to orange and purple will be recognized as red. This adjustment will be valid in “Erase Colour” and “Con- vert Colours”. See p.123 “Colour Sensitivity”

A Select the type of colour key.
❖Single Colour Copy

Copies in one designated colour.

Note

❒Yellow, magenta, and cyan will be copied with one toner colour, but beige, orange, red, light green, pink, green, marine blue, blue and purple uses 2 toner colours to copy.

❖Two Colour Copy

• Two Colour Copy (Normal) Copies black and other parts in two specified colours.

Note

❒You can select from basic col- ours and registered colours.

AFZ026S

When the {Single Colour} key is selected

A Select designation method of colour ( [Basic Colour], [User Colour] ).

B Select the colour, and then press [OK].

28