Copying

Slip Sheets

Every time the originals' page chang- es, a slip sheet is inserted. This function can be used to automatically insert a slip sheet between OHP transparencies, or as a stacking func-

2 tion. You can also copy onto slip sheets.

Preparation

Before selecting this function, set the tray for slip sheets. See “Slip Sheet Tray” in “Tray Paper Settings ”, General Settings Guide.

Note

❒Load slip sheets in the same size and orientation as copy paper or OHP transparencies.

❖When using OHP transparencies from the bypass tray

• Copy

Note

❒Press the {#} key and select [OHP Sheet] in Special paper. See p.24 “When copying onto OHP Trans- parencies or Thick Paper”.

❒Paper will be delivered to the ex- ternal tray when copying onto OHP transparencies or thick paper from the bypass tray, even if you have specified not to use the exter- nal tray as the output tray.

A Press [Cover / Slip Sheet].

B Press [Slip Sheet].C Select [Copy] or [Blank], and then press [OK].D Select the paper tray containing the sheet paper to copy the origi- nals.

When using OHP transparencies, open the bypass tray.

E Place the originals, and then press the {Start} key.

•Blank

82