Ricoh DSc428, DSc435, DSc445 Note, Note, Note, Note, Note, [Print], [Suspend], Limitation, Sample Copy, Sample copy, [Rotate Sort], C Place the originals, D Press the {Start} key

Copier Functions

❖When the booklet finisher is installed

Note

❒When the optional finisher is in- stalled, use the User Tools to display [Rotate Sort]. See p.123 “Select Stack Function”.

B Enter the number of copy sets using the number keys.

Limitation

❒The maximum number of sets is 999.

Note

❒To confirm the type of finishing, press the {Sample Copy} key. See p.43 “Sample copy”.

C Place the originals.

Note

❒When placing originals on the exposure glass, start with the first page to be copied. When placing originals in the ADF, set the first page on top.

❒When placing originals on the exposure glass or in the ADF us- ing the Batch function, press the {#} key after all the originals have been scanned.

D Press the {Start} key.

Sample copy

You can use this function to check copy settings before making a long copy run.

Note
❒ This function can be used only	2
when the Sort function is turned

on.

A Select Sort and any other necessary functions, and then place the originals.B Press the {Sample Copy} key.

ZFNS016E

One copy set is delivered as a sample.

C If the sample is acceptable, press [Print].

The specified number of copies is made, minus one for the proof copy.

Note

❒If you press [Suspend] after checking the results, return to

step A to adjust the copy set- tings as necessary. You can change the settings for Staple, Duplex, Copy Orientation, Stamp, Margin Adjust., and Cover / Slip Sheet. However, depending on the combination of functions, you may not be able to change certain settings.

43