Copier Functions

Note

❒When placing an original on the exposure glass, start with the first page to be copied. When placing an original in the ADF, set so the first page is on the top.

❒When placing an original on the

exposure glass or in the ADF us- ing Batch mode, press the {#} key after all the originals have been scanned.

D Press the {Start}key.

Sample copy

Use this function to check the copy settings before making a long copy run.

Note

❒This function can be used only when the Sort function is turned on.

A Select Sort and any other necessary functions, and then place the originals.

B Press the {Sample Copy}key.

AHU021S

One copy set is delivered as a sam- ple.

C If the sample is acceptable, press [Print].

The number of copies made is the number specified, minus one for the proof copy.

Note

❒If you press [Suspend] after checking the results, return to step A to adjust the copy set- tings as necessary. You can

change the settings for Staple, Duplex (one-sided → one-sid- ed, one-sided → two-sided), Copy Orientation, Margin Ad- just., and Cover/Slip Sheet. However, depending on the combination of functions, you may not be able to change some settings.

Changing the number of sets

You can change the number of copy sets during copying.

Note

❒This function can only be used when the Sort function is turned on.

A While "Copying" is displayed, press the {Clear/Stop}key.

B Press [Change Quantity].

C Enter the number of copy sets with the number keys, and then press the {#}key.

Note

❒The number of sets you can en-

ter differs depending on when the {Clear/Stop}key is pressed.

D Press [Continue].

Copying starts again.

2

35