Programs

Programs

You can store frequently used copy job settings in the machine memory and recall them for future use.

Storing a Program

Note

❒You can store up to 10 programs.

❒You can select the standard mode or program No. 10 as the mode to be set when modes are cleared or reset, or immediately after the op- eration switch is turned on. See p.94 “Change Initial Mode”.

❒Paper settings are stored based on paper size. So if you place more than one paper tray of the same size, the paper tray prioritized with User Tools (System Settings) will be selected first. See “Paper Tray Priority” in “Tray Paper Set- tings”, General Settings Guide.

❒Programs are not deleted by turn-

ing the power off or by pressing the {Clear Modes} key. They are canceled only when you delete or overwrite them with another pro- gram.

A Edit the copy settings so all functions you want to store in this program are selected.

B Press the {Program}key.

C Press [Register].

2

D Press the program number you want to store.

Note

❒Program numbers with m against them already have set- tings in them.

Reference

p.76 “Changing a Stored Pro- gram”

E Enter the program name with the letter keys on the display panel.

You can enter up to 40 characters.

Reference

For details about entering char- acters, see “Entering Text”, General Settings Guide.

Note

❒If you do not want to enter the program name, proceed to step

F.

75