Copier Functions

 

D Select the stamp you require.

Stamp position and original orientation

 

E Press [All Pages] or [1st Page only] to

 

 

select the print page.

GCSTMP6E

Note

❒You cannot use the bypass tray with this function.

❒Only one message can be stamped each time.

Reference

Related initial settings

p.100 “Stamp Position 1 - 4”

p.101 “Stamp Format 1 - 4”

A Press [Edit/Stamp].

B Press [Stamp].

C Press [User Stamp].

2

Note

❒You can change the stamp posi- tion. See p.63 “To change the stamp position”.

F After making all settings, press [OK].

G Press [OK].

H Place your originals, and then press the {Start}key.

To change the stamp position

A Press [Change].

B Select the desired position, and then press [OK].

To program the user stamp

Note

❒The range of stamp images for readability is 10–297 mm high (0.4"–11.7") and 10–432 mm (0.4"– 17") wide. However, if the value exceeds the maximum value of the area (5,000 mm2, 7.75 inch2), it is corrected within the range of the area automatically.

❒Up to four images that you use fre- quently can be stored in the ma- chine's memory.

63