Copying

A Make sure that the machine is in copier mode.

B Press the {User Tools/Counter}key.

2

C Press [Copier/Document Server Features ].

D Press [Stamp].

E Press [User Stamp].

F Press [Program/Delete Stamp].

G Press [Program], and then press the stamp number (1–4) you want to program.

Note

❒Stamp numbers with malready have settings in them.

❒If the stamp number is already being used, the machine will ask you if you want to over- write it . Press [Yes] or [No].

H Enter the user stamp name with the letter keys on the display pan- el. You can register up to 10 char- acters.

I Press [OK].

Reference

“Entering Text”, General Settings Guide

J Enter the horizontal size of the stamp with the number keys, and then press [#].

K Press [Vertical], and then enter the vertical size in the same way as step J.

L Place the original for user stamp on the exposure glass, and then press [Start Scanning].

The original will be scanned, and the stamp will be registered.

Note

❒Originals cannot be scanned from the ADF when program- ming the user stamp.

M Press [Exit].

N Press [Exit].

The display returns to the Copi- er/Document Server Features main menu.

O Press [Exit].

Exits settings and gets ready to copy.

To delete the user stamp

Important

❒You cannot restore a deleted stamp.

A Make sure that the machine is in copier mode.

B Press the {User Tools/Counter}key.

64