Note • Updated information on installation is provided in the [Readme] file in the [Usb drvs] folders. If necessary, refer to this information.

•When you connect/remove the USB cable or cancel installation before installing the USB driver, the cable may be recognized as an unknown device for a PC. Refer to page 166 “Troubleshooting” for troubleshooting.

For Macintosh

If you are using a Macintosh, install the USB driver as follows.

A Turn the PC on.

When the Macintosh is up and running, proceed to the next step.

B Insert the CD-ROM provided in the CD-ROM drive of the PC.

C Double-click on the CD-ROM. Next double-click on the [Usb driver] folder, and then double-click on [RDC-i USB Inst].

Installation of the software for connecting the camera to the PC by USB cable will start. Follow the instructions displayed on the screen. When installation is completed, proceed to the next step.

Note • Updated information on installation is provided in the [Readme] file. If necessary, refer to this information.

• This USB driver cannot be used with Mac OS-X.

14