C Insert the connector on the other end of the cable into the USB port of the PC.

D Turn the camera on.

The PC will automatically detect the equipment which has been connected and operate accordingly. If a message is displayed, follow the instructions on the screen.

USB connection is completed.

Before disconnecting the USB cable, check that data transmission is not performed between a camera and a PC, turn off the camera and disconnect the USB cable.

Important

• For Windows Me user, make sure to give a time interval of more than

Note

 

10-seconds when:

•Turning off and then on the camera

•Setting the mode dial from the modes other than Communication mode to Communication mode.

•Inserting and removing the USB cable

•Do not remove the RDC-i virtual server process installed in Windows Start-up item folder. The USB connection can not be made without it.

1

Started Getting

21