■For Macintosh
You can connect the camera to a Macintosh using the USB cable supplied with the camera.
A Open the terminal cover on the leftside of the camera.
B Insert the smaller connector on one end of the USB cable supplied into the DIGITAL (USB) terminal of the camera.
C Insert the connector on the other end of the cable into the USB port of the PC.
D Turn the camera on.
The PC will automatically detect the equipment which has been connected and operate accordingly. If a message is displayed, follow the instructions on the screen.
Connection by USB cable is completed.
Before disconnecting the USB cable, perform the following steps
Check that data transmission is not performed between a camera and a PC. Turn off the camera.
Disconnect the USB cable.
22